Beverage sterilization automatic high-speed cage unloading machine :
This machine is mainly suitable for all kinds of canned drinks or cans. It will automatically unload the can before the second sterilization. This machine pushes the full cans stacked in the sterilization cage to the transmission leveling block layer by layer through the pushing and unloading device. During the entire unloading process, the interlayer comes out and automatically collected, and the upper layer, unloading, stopping and lower layer are all automatic. This machine replaces the manual unloading method, which can save manpower and greatly improve the production effect.
(1) Introduction to automatic basketing of food cans and beverage loading and unloading machines:
The solid cans are conveyed by the modular mesh belt conveyor, the solid cans are divided into layers, and then automatically stacked in the sterilization cage from bottom to top. The compartments are automatically put in and automatically rise during the entire cage. , Automatic canning, canning, automatic lowering, full cage automatic stop canning, and a perfect configuration mechanism instead of manual canning, greatly improving production efficiency.
(2) Introduction of canned food & beverages when unloading the cage:
The cans in the sterilization cage are automatically separated from top to bottom layer by layer to the conveyor line, and then the single-row solid cans are conveyed through the modular mesh belt conveyor. During the whole cage unloading process, the interlayer board is automatically taken out, automatically rises, automatically unloads, the empty cage automatically stops, and automatically lowers, and the perfect configuration mechanism replaces the manual unloading to increase productivity.
(3) Partition storage unit
The height can be adjusted by hydraulic lifting, and the side guards can be adjusted back and forth. The position of the baffle is convenient for the suction cup to grab.
(4) Partition conveyor
Adopt engineering plastic chain to transport the partitions, which will not cause damage to the partitions, and the transportation is stable and fast. The guard plate adopts a structure that can be adjusted front and rear to ensure that the partition does not deflect during transportation. The partition pushing mechanism ensures accurate partition positioning.
| 1 Production capacity:
|| 600 cans/min (subject to Φ66 cans and Φ1600mm kettles)
| 2. Total power:
| 3. Total weight:
| 4. Power supply:
| 5. Control power supply:
| 6. Compressed air source:
| 7. Air consumption:
(5.1) Pedal section
The main frame is welded with high-quality carbon steel, and the surface is covered with aluminum anti-skid pattern plates. There are guard rails on both sides, and ladders and handrails at the end.
(5.2) Pedal section
The main frame is welded by stainless steel and the surface is covered with stainless steel anti-skid checkered plates. There are guard rails on both sides, and ladders and handrails at the end.
(6.1) Automatic cage basket turnover track
The conveying module is mainly composed of a straight conveying module and a steering conveying module. The main frame of each module is welded with high-quality stainless steel profiles, which is beautiful and generous. Using high-strength stainless steel roller chain to transport the cage, the structure is firm, the operation is stable, the four corners of the steering module do not need to be lubricated, and the four corners of the steering module are oriented and positioned. The appearance is clean and the action is reliable.
(6.2) Artificial cage basket turnover track
Two pre-stored tracks, each track has the same storage capacity as the storage basket of the sterilizer. The main frame is welded with high-quality carbon steel, and the surface is covered with non-slip checkered plates. The outer surface is sprayed with plastic paint, which is beautiful and generous. The basket track is made of stainless steel
(7) Control system
The whole system is automatically controlled by PLC programmable controller. Each conveying module is equipped with a positioning detection switch, which can realize fully automatic operation during the production and operation of canned food and canned beverages without manual intervention. Equipped with a control box, touch control panel can display: real-time product information and equipment operating conditions and other parameters (optional). Safety devices such as emergency stop switches to ensure equipment safety and personal safety; it is convenient for workers to control equipment