KGBZX Wrap Packing Packing Machine
The 25 bags per minute wrap-around boxing machine has a mesh belt conveyor to arrange the products neatly, divided into six rows, five rows or four rows (depending on the packaging method), and the paper is also stacked on one side, using the principle of robot arm When the paper and product reach the positioning point, the machine push mechanism is used to swing the product to the left and right to make the product lightly fall on the paper. There is a set of air cylinders and suction cups under the paper to pull down the paper and products into shape. Use the chain to drive forward and re-do the forward movement. After the box is formed, it will spray glue and glue every time it is conveyed, and push it forward on the conveyor, and then stack the pallets. Can products adopt swing arm assisted bottle feeding method, and plastic bottles adopt automatic bottle separator to assist bottle feeding method.
| 1. Model:
| 2. Type:
|| chip carton packaging machine, hot melt sealing
| 3. Production capacity:
|| 20-25 boxes/min
| 4. Power supply:
|| AC 380V, 3-phase, 50HZ
| 5. Control power supply:
|| DC24V, AC 220V, single-phase, 50HZ,
| 6. Packaging method:
|| According to customer requirements
| 7. Compressed air pressure:
|| ≧6.0 kg/cm2
| 8. Air consumption:
|| 1200 L/min
| 9. Packing material:
|| sheet corrugated paper
| 10. Equipment size (approximately)
|| Length 5800 × width 2550 X height 1800
| 11. Conveyor height (approximately)
|| Import docking: 1260mm
Main Structure And Characteristics
1. The overall frame base is made of high-quality carbon steel profiles with good structural rigidity.
2. The cam divider is used for precise synchronous positioning to ensure stable and reliable beat movement.
3. The main drive reducer adopts SEW's products, and the power output is stable.
4. The working process, starting and final steps are all slow and stable, running fast in the middle, shortening non-working time, and high productivity.
5. AirTAC pneumatic components and advanced electronic control technology reduce the risk of equipment downtime.
6. In addition to the protective cover, this machine is also equipped with an overload protection device, which has a high degree of safety performance.
7. The machine has low noise and uses oil-free lubricated pneumatic components to avoid oil pollution.
8. Using touch screen operation, man-machine dialogue, can adjust the type of wrapping, display the production speed, the cause and location of the failure.