3-5barrel water filling machine line description
3-5barrel water filling machine line description:
This KSTGF series barreled water filling line is mainly used to produce bottled water with volume from 3 gallons to 5 gallons. And different models can offer production capacity from 100 to 2000 B/H. The whole production process operates as follows: Empty barrel is conveyed stably by conveying belt into decapping machine which will remove bottle caps. Those caps can be recycled after being cleaned and disinfected. Then the barrel is conveyed into the external brush washing machine to take all-around rinsing with hot alkali and pure water. After rinsed, a barrel will be sent to rinsing filling capping machine, where bottles are rinsed inside with hot alkali, disinfectant liquid and pure water. And the barrel is filled with pure water provided by the water treatment system. Then after capped, those barreled water is sent to shrink packing machine in which shrink packaging of caps is done. The whole production process is controlled by PLC, so this barreled water production line is automatic, through a control panel, users can monitor visually working conditions of each machine section and operate conveniently.
1. Water Treatment Plant
2. PET Bottle Blowing System
3. Removing cap machine
4. Inside&Outside Brushing Machine
5. 3-5 Gallon washing filling capping machine
6. Date and Batch Coding Machine
7. Sleeve Shrink Labeling Machine
3-5barrel water filling machine line equipemnt:
1. Raw water tank + Raw water pump
2. Silica sand filter + Active carbon filter + Sodium ion exchanger + Precision filter + Security filter
3. Reverse Osmosis
4. UV sterilizer
5. Finished water tank + Pure water pump
1. The unique cam linking system integrates mold-opening, mold-locking and bottom mold-elevating in one movement, equipped with high speed servo driving system which greatly shortens the blowing cycle and accelerates the speed.
2. Minimized transfer pitch for increasing heating efficiency and saving energy.
3. Easy to adjust, exchange and access heating oven; Protection for preform thread against heating.
4. Through finite element analysis to optimize modular design for reducing machine wearing and moving inertia.
5. Efficient consumption: Up to 45 % less electricity and 35 % less compressed air
3.Cap removing machine
If your bottle is a recycling bottle and with a cap on it , this device can help you remove the cap from the bottle.
Automatic barrel outer brushing machine specially work with 5 Gallon barreled water producing line. It is used for reducing the settling caused by the mineral water itself and some algae substances in the process of mineral water producing. The machine is made of excellent stainless steel with the advantage of easily-rinsing and corruption-resistance. The main electrical elements adopt the products with brands of SIEMENS and OMRON. Pneumatic elements adopt the products with brand of AIRTAC.
1. Uploading and dropping barrels changed from 45 degree to translatory which is more stable.
2. Nozzle can insert into 10-15cm of the barrel in order to rinse little impurities down. Rinsing pump is separately controlled by different magnetic valves. Pump only work when there is barrel on that. It can avoid the mixture of different cleaning fluid.
1. Liquid level difference is ontrolled in 1cm.
2. Machine is equipped with Cap Sterilization system, which is 1.2m. The system make products more clean and safe by using sterilization and finished water.
3. Customers can choose to equip ABB/SEW motor, GRUNDFOS water pump, FESTO pneumatic component.
The chain board on conveyor is made with stainless steel. The appearance of foot stand is perfect, and the height can be adjusted.