PET bottle Beverage Leakage Automatic Detection Rejection System

Automatic detection and rejection system for beverage leakage

The automatic beverage leakage detection and rejection system is a fully automatic multifunctional liquid detection system equipment, divided into two parts: the beverage bottle detection unit and the rejection unit. Among them, the beverage level detection system includes: a squeeze detection unit (module) and a liquid level detection unit (module). Stable speed is 24000 bottles per hour

 The extrusion pressure unit uses extrusion and contact pressure sensing technology to detect PET bottles. When the liquid bottle passes the detector, the double-sided belt of the detector squeezes the liquid bottle, the pressure sensor behind the belt transmits the pressure value in real time, and the control center analyzes the pressure value and makes a judgment. Thereby feedback whether the aluminum film of the sealed product is leaking; the signal is sent to the rejection device, and the unqualified product will be rejected by the rejection device.

 The PET bottle beverage level detection unit adopts X-ray technology, using the principle that the radiation intensity changes with the surface position of the substance after the low-energy photon source interacts with the substance to be measured, and is used to control and detect the volume of the substance to be measured. Fill the beverage bottle with liquid material. Due to the non-contact measurement method, the problem that the traditional weighing method of PET bottles cannot measure the filling liquid capacity of the production line is solved. Therefore, it is widely used in the online detection of bottled water, beverages and liquids. The main structural characteristics of the detection unit: non-contact detection, fast detection speed, high accuracy; can work under the condition of conveyor variable speed, and is not limited by the stability of the conveyor speed;

 
The Working Flow Chart Of The Equipment Is As Follows:

 
The liquid detection system, including the detection machine and the rejector, should be installed on a single straight chain with a length of at least 4 meters.
 
Technical parameters and characteristics of this machine

 
Fitting Brand
 

 
Detecting Function:
 
Gas leak or micro-leak
 
Applicable Containers:
 
PET bottles or Aluminum film sealed bottles